Planet Ekstender PoE (POEE202) Trzcińsko-Zdrój

Planet POE-E202 1-Port 802.3at PoE+ na 2-Port 802.3af/at Gigabit PoE Eksteder Rozwiązanie PoE znoszące ograniczenie 100m RJ45 PLANET POE-E202 jest ekstenderem 1-portowym PoE+ na 2-porty 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time. The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter. Physical Port 3-port 10/100/1000BASE-T Gigabit RJ45 interface 1-port data + power input 2-port data + power output Power over Ethernet 1-port data + power input 2-port data + power output Extends the range of PoE to an additional 100 meters (328ft.) Forwards both Ethernet data and PoE power to remote device Layer 2 Features Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X Integrates address look-up engine, supporting 2K absolute MAC addresses 10K iumbo packet support IEEE 802.1Q VLAN transparency Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation Automatic address learning and address aging Supports CSMA/CD protocol Case and Installation No external power cable installation required Made of metal, desktop size design Wall-mountable, Plug-and-Play installation 0 ~ 50 degrees C operating temperature Plug and Play Installation The POE-E202 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E202 injects power to the PD without affecting the data transmission performance. The POE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD. nterfaces PoE IN 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE "Data + DC power" in auto MDI/MDI-X, auto-negotiation RJ45 connector PoE OUT 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE "Data + DC power" out auto MDI/MDI-X, auto-negotiation RJ45 connector Power over Ethernet PoE Standard "PoE In" Port IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD Per "PoE Out" Port IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE PoE Power Supply Type End-span (Type A) PoE Power "PoE In" Port 52~56V DC, max. 30.8 watts Per "PoE Out" Port 44~55V DC, max. 25 watts Power Pin Assignment "PoE In" Port 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) Per "PoE Out" Port 1/2 (+), 3/6 (-) Hardware Specifications Data Rate 10/100/1000Mbps MAC Address Table 2K Data Buffer 2Mbits Switch Architecture Store-and-Forward Switch Fabric 6Gbps Switch Throughput 4.46Mpps @ 64 bytes Jumbo Frame 10KB Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex LED Indicators "PoE In" Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) "PoE Out" Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) "PoE Out" Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) Protection ESD (Ethernet): 2KV (TBD) Surge (EFT for power) : 2KV (TBD) Enclosure Metal Installation Wall mountable Dimensions (W x D x H) 140 x 77 x 28 mm Weight 234g Power Requirements IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption 1.6 watts/5.5BTU (System on with PoE input) 2.2 watts/7.5BTU (Ethernet full loading without PoE function) 36 watts/122.8BTU (Full loading with PoE function) Network Cable 10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, 328ft) Standard Conformance Regulatory Compliance FCC Part 15 Class A, CE Standard Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3x Flow Control Environment Operating Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Ordering Information POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender Gwarancja: Producenta (36m)